联系我们

名称:保定连锁护坡模具厂

电话:xxx

手机:xxx

邮箱:xxx

地址:xxx

新闻动态
护坡模具应贮存于常温干燥库中
护坡模具应贮存于常温干燥库中。堆码高度不得超过3.5 m,应避免重压或挤压堆放。
The slope protection mould shall be stored in the normal temperature drying warehouse. The stacking height shall not exceed 3.5m, and heavy pressure or extrusion stacking shall be avoided.
护坡模具不允许与有毒有害物质混放,应远离热源,在存放处应设置醒目的禁火标志。
The slope protection mould shall not be mixed with toxic and harmful substances, and shall be kept away from the heat source. Striking no fire signs shall be set at the storage place.
护坡模具制作工艺特性
Manufacturing process characteristics of slope protection mould
1.可锻性
1. Malleability
具有较低的热锻变形抗力,塑性好,锻造温度范围宽,锻裂冷裂及析出网状碳化物倾向低。
It has low hot forging deformation resistance, good plasticity, wide forging temperature range, low tendency of forging crack, cold crack and precipitation of network carbide.
2.退火工艺性
2. Annealing process
球化退火温度范围宽,退火硬度低且波动范围小,球化率高。
The spheroidizing annealing temperature range is wide, the annealing hardness is low and the fluctuation range is small, and the spheroidizing rate is high.
3.切削加工性
3. Machinability
切削用量大,刀具损耗低,加工表面粗糙度低。
Large cutting parameters, low tool loss and low machining surface roughness.
4.氧化、脱碳敏感性
4. Oxidation and decarburization sensitivity
高温加热时抗框格护坡模具 箱体护坡模具 华尔街铜牛 电阻柜 接地电阻柜 电缆保护接地箱 隔离墩模具 化粪池模具氧化怀能好,脱碳速度慢,对加热介质不敏感,产生麻点倾向小。
When heated at high temperature, it has good oxidation resistance, slow decarburization speed, insensitive to heating medium and small tendency to produce pitting.
5.淬硬性
5. Hardenability
淬火后具有均匀而高的表面硬度。
After quenching, it has uniform and high surface hardness.
6.淬透性
6. Hardenability
淬火后能获得较深的淬硬层,采用缓和的淬火介质就能淬硬。
After quenching, a deep hardening layer can be obtained, and it can be hardened with mild quenching medium.

联系方式

  1. 名称:保定连锁护坡模具厂
  2. 电话:xxx
  3. 手机:xxx
  4. 邮箱:xxx
  5. 地址:xxx

版权 © 保定连锁护坡模具厂   推荐:流水槽模板,连锁护坡模具,收费岛模板,六角块护坡模具 网址:www.hupomojuz.cn

网站建设及优化保定遨游网络公司